Tuesday, August 30, 2016

Lip balm

I'm a lip balm junky. I collected Lip Smackers as a young teen, and I've been totally addicted to Burt's Bees original peppermint lip balm for about 10 years, and was a fan of Blistex's Lip Medex before that. I've made lip balm lots of times in the past but never been totally satisfied with the outcome. I thought it was time to rectify that.

I tried to duplicate Burt's Bees about 6 months ago. I had the right ingredients, but it turned out way harder than I wanted. About 2 months ago, I rebatched the hard lip balm, adding more coconut oil, and got a really nice consistency but wasn't sure what the actual percentages were! The other day, I made an educated guess at what the recipe ought to be and tried it out with some new lip balm flavouring (mai tai punch, very nice!) I picked up from Candora.

Glam's Lip Balm Recipe
49% coconut oil
25% beeswax
24% sweet almond oil
1% vitamin E
1% flavouring

I melt my oils/wax in a little metal dish on low heat on the stove, but I would think microwaving/stirring intermittently would work too. When the wax and coconut oil are all melted and stirred in, I add the flavouring and vitamin E, give it a stir, and pour it into a lip balm tube.

A regular lip balm tube holds about 4.5 grams. I made a single trial tube (not quite full) by using 2 grams of coconut oil, 1 gram each of beeswax and sweet almond oil, and a few drops each of vitamin E and flavouring oils. It's a good way to try the recipe out to see if the formula is to your liking.

This is how full the tube is using the 4 g version of the recipe.

This lip balm is smooth (not grainy), of medium thickness (not too hard, not too runny/gooey), has decent longevity, and is not shiny.

If you wanted to make this like Burt's Bees, use peppermint oil for your flavouring, and, if you are making a larger batch, the tiniest bit of rosemary oil. One drop of rosemary oil in a single tube would be too much, so just leave it out if you are making only one or two tubes.

NOTE: Feel free to use this recipe, even sell products you make using it (you, of course, would be responsible for any liability for products you sell), just don't claim it is your recipe. Give credit where credit is due. If you re-post my recipe, please reference it properly and provide a link back to here. Enjoy!

Rosewater, glycerin, and shea cream

Wow, I actually had time to do a little alchemy last night! It feels like it has been forever!

I've been itching to use some of the floral water I bought a few weeks ago, and since I have about a million trial batches of micellar water on the go I couldn't excuse making more of that (although it will be a future project), so I made a cream! I thought the rosewater would add a nice light fragrance without including a fragrance or essential oil.

I used a very similar recipe to the one I used for my mom's shea and avocado cream, but I swapped the avocado oil for sweet almond, and replaced half of the water with rosewater. I also used liquid Germall Plus to preserve it instead of sodium benzoate/potassium sorbate.

I used emulsifying wax NF to hold the phases together. It has quite a high oil content, with 10% shea butter and 15% sweet almond oil, so it is quite greasy going on, but it is all absorbed on my hands (the main area I plan to use it) within about 30 minutes and the after-feel is soft and a little powdery. I quite like it; I knew I would because I liked the stuff I made for my mom! It is actually quite nice on the feet; once the initial greasiness has absorbed, it doesn't leave me with that wet-foot feeling I get from a lot of lotions (looking at you, Body Shop body butter...).

The only change I think I would make in an ideal world would be to either use more rosewater, or use a refined, deodorized shea butter, because I would like it to smell a bit more rosy and a bit less like unrefined shea butter!

Thursday, August 18, 2016

PEG-6 caprylic/capric glycerides micellar water: excitement and frustration

My new order of ingredients came two days ago, and let me tell you, boy was I excited! When I got home from work and saw that the box there waiting for me was from Lotioncrafter, I pretty much dropped everything and busted out my alchemy equipment!

I had a recipe all ready to try out, with similar ingredients to Bioderma's Sensibio. It included distilled water, PEG-6 caprylic/capric glycerides (of course!), xylitol, cucumber peel extract, disodium EDTA, and a preservative. It was a simple one-phase mixing process, as there are no water and oil parts to emulsify.

As soon as I added the PEG-6 caprylic/capric glycerides to the water, it went kind of cloudy, which surprised me a bit, as the Bioderma formula is clear. I didn't worry about it, because the stuff I made with Cromollient SCE is also milky. I added in the rest of the ingredients. As expected, when I added the cucumber peel extract, the colour changed a bit. I'm using a powdered rather than a liquid extract and it makes things kind of yellow-y green. But it was fine and I mixered it all up.

I obviously can't leave well enough alone, so I tried it out right away. It felt okay, but not very much like the Sensibio. It was cleansing, but the dry-down wasn't the same; more residue-y, maybe from the cucumber extract or the gooey liquid Germall Plus I used to preserve it.

Anyway, within a few hours, I noticed something was settling out of solution onto the bottom of my beaker. I initially thought it was the Germall, since it looked pretty thick, but by the morning, the solution was clear with all the thick stuff sitting on the bottom, so now I figure it must be the PEG-6 caprylic/capric glycerides! What the heck! It's supposed to be a solubilizer, why is it coming out of solution?!

Clearly I need to have another go or two at this one. Sadly, it might not be for a while, since I have to help someone move this weekend and work out of town all next week. Boo. I guess I have time to contemplate what went wrong this time, since I still haven't figured that part out yet....


UPDATE Aug 28, 2016: So the strangest thing happened. I was more-or-less away for 10 days, so I just left this to sit. When I got home today, I mixed it up again with a frother-style mixer, and, lo! and behold, it is a clear solution! What the heck!? Did it just need some time, or did it just need some more serious mixing, or both? Anyway, I tried it again. It makes the same few tiny bubbles on the cotton pad as Sensibio (if you rub the two sides of the pad together), and it does not feel nearly as "residue-y" as I remember from before. Maybe the cucumber extract hadn't entirely dissolved before. Anyway, it is quite nice. Definitely an improvement on the last time I tried it. Perhaps a little more cleansing than Sensibio. Maybe they only use 0.75% surfactant in the commercial formula. Yay!

Monday, August 15, 2016

Polysorbate-20 micellar water - 2nd try

I had another go at micellar water made with polysorbate-20 tonight. I kept with my super simple testing formula as follows:

1% surfactant (polysorbate-20, in this case)
q.s. preservative (used 0.5% liquid Germall Plus)
q.s distilled water to 100%

It is nice and clear, and doesn't foam or feel soapy on the skin or the cotton pad the way the decyl glucoside and the caprylyl/capryl glucoside did. It seemed to clean off my sunscreen and day's worth of oily-face adequately. The dry-down is nice, definitely not sticky, maybe a little powdery, even.

Compared to the Bioderma Sensibio, I feel the polysorbate-20 at 1% may be just a fraction more drying. I wouldn't call it a drying cleanser though; my face feels less dry after using this than it does after using one of my old standbys, Cliniderm Gentle Cleanser, which is designed for "senitive, allergic, reactive or dry skin." I'm in no particular rush to apply a moisturizer.

Plus, it doesn't burn on my face like my last try did, since there's no Optiphen in it, wooo!

Verdict: I like it. This is a good option for DIY micellar water. Polysorbate-20 is a common, easily accessible ingredient, it's pretty cheap, and it does the job nicely. I haven't done in-depth research on this, but I haven't heard of anyone being sensitive to it (not to say it never happens, people can be allergic to literally anything). It's gentle enough that it is the surfactant used in Bioderma's ABCDerm H2O micellar solution designed for baby skin. I bet my basic recipe could be prettied up with all kinds of things like aloe or allantoin or panthenol to make something fairly decent.

I don't know how it works on makeup, since I rarely wear any (I'm definitely more into skincare than makeup). If you try it, lemme know how it does!

Micellar water update

So, I picked up a couple little travel-sized bottles of Bioderma Sensibio, since it is the gold standard of micellar waters, in order to have a reference point of what a commercial product is like when I am formulating. Wow, it's really nice! I could totally get over my squickiness about a leave-on surfactant product if it feels like that does... at least for one cleanse a day. I've got my benchmark!

Of all the formulas I've tried so far, I think the polysorbate-20 feels the most similar to the Bioderma, though I want to try that one again with a non-Optiphen preservative.

I also have grand plans for my micellar water recipes, and I haven't even got my PEG-6 caprylic/capric glycerides surfactant yet! I picked up some rose water and some orange blossom water from the international foods section of a local grocery store and I think I'll try to include them in some recipes. I'm so excited! :D

Thursday, August 11, 2016

Linen spray

So this one is not really a cosmetic, but it would be if I sprayed it on my body instead of on my sheets! It's got the same ingredients as if I were to make a scented body spray (minus any nice things I might add, like aloe or panthenol).

It is crazy-simple to make, just four ingredients: fragrance, solubilizer, water, and preservative!

My recipe was as follows:

1% fragrance oil
1% solubilizer (I used polysorbate-20)
q.s. preservative (I used Optiphen Plus, since it's not going on my skin... my skin doesn't like Optiphen Plus, and I have a bunch of it that needs to get used up somehow.)
q.s. distilled water to 100%

Mix and pour into a spray bottle.

That's it.

I scented mine with a clone of Johnson's Baby Bedtime Bath fragrance from Indigo Scents. It's more lavender-y than I was hoping, although it could be totally true to the North American version of the fragrance, which I'm not familiar with. I was hoping it would be a dupe for some Johnson's baby talco para antes de dormir (bedtime baby powder, for those who don't read Spanish), that I brought home from South America, which I love the scent of. It's not that similar, really. The South American stuff definitely contains lavender, but is also a bit... fruity? It's hard to place, but it's lovely.

It's funny how scents vary internationally. Even the original Dove bar has a different fragrance for markets outside of North America, although I know from experience the European and South American versions smell the same. Personally, I prefer the North American version, as I'm a fan of powdery smells, but the international version is similarly clean, mild, and soapy smelling. I've found the international version of the Dove in dollar stores here in Canada... some wayward imports, perhaps?

Wednesday, August 10, 2016

Polysorbate-80 micellar water

The one solubilizing surfactant I own that I haven't tried in a micellar water yet: polysorbate-80.

I've continued on with my stripped down testing method, making the micellar water with just distilled water, 1% surfactant, and preservative.

Maybe 1% surfactant is not enough, or maybe polysorbate-80 is just a sticky one, but my skin feels moist and not terribly clean after using this product. I must say that it is a good-looking product though, making a nice, clear solution.

I have to say, so far I prefer polysorbate-20 and PEG-40 hydrogenated castor oil to the others I've tried. But... I just ordered some PEG-6 capric/caprylic triglyceride from Lotioncrafter (why they've trade-named it SurfPro CC-6, I'll never understand, it makes it so hard to find). This surfactant is the one used in the celebrated Bioderma Sensibio/Crealine, so I have high expectations even though I haven't tried the original. (Hint: Watch for a Sensibio dupe attempt coming up once I receive my ingredients!)